Billed as the little wash-light that makes a big difference, the Clay Paky Sharpy Wash 330 made a dramatic debut at last week’s LDI show. Ask anyone on the trade show floor which products attracted their attention and the Sharpy Wash 330 was mentioned by most.
The Sharpy Wash 330 is an extraordinarily compact, lightweight 330W washlight, with the luminous efficiency, graphic and optical performance of a 1000W fixture. It is silent and quick, and fitted with a complete CMY colour system, special colours, 6.5 to 50 degree zoom, mechanical dimmer, beam shaping filter, and motorized top-hat. It is an eco-friendly light, allowing considerable running and consumption cost savings.
“Caroline and I both thought it was a great piece of lighting kit,” commented an impressed Neale Mace of Entertainment Installations. “Seeing it running on the Clay Paky stand it was easily the brightest thing there and it zoomed as well. It’s an awesome product and I’m sure it’ll be all over lighting riders soon.”
“The Sharpy Wash 330 is probably the perfect small to medium sized venue wash light,” concurred Richard Neville of Mandylights. “The tight beam angle gives you an almost ACL style beam effect that wi ll cut over any spot fixture, while the wide zoom is uniform and makes it perfect to use as a normal wash fixture. Then of course there’s the speed of the CMY, movement and zoom which really sets it apart from any equivalent fixture.”
POWER SUPPLIES
115/230V 50/60 Hz
INPUT POWER
520VA at 230V 50Hz
LAMP SOURCE
Discharge lamp with a short arc burner in a reflector system
- Type: Osram Sirius HRI 330W
- Output lamp power: 330W
- Color temperature: 8,000 K
- Nominal luminous flux: 15,000 lm
- Average rated life: 1,500 h
OPTICS
Front-Fresnel lens (patented spiral lens)
Zoom: from 6.5° to 48°
COLOR SYSTEM
Color wheel with 7 fixed colors + open
CMY Color System
EFFECTS SECTION
Smooth and frosted mechanical dimmer
High speed Stop/Strobo effect
Soft-edge Filter
Heavy Frost Filter
Rotating and indexable beam shaper
CONTROL AND PROGRAMMING
Max 20 DMX 512 control channels
DMX protocol signal: USITT DMX 512
Display: Graphic LCD backlit b/w Display
Pan/Tilt Resolution: 16 bit
Movement control: vectorial
DMX signal connection: 3 and 5 pole XLR input and output
Software upload through DMX input
BODY
Aluminium structure with die-cast plastic cover
Two side handles for transportation
Device locking PAN and TILT mechanisms for transportation and maintenance
MOVING BODY
Travel:
PAN = 540°
TILT = 240°
Resolution:
PAN=2.11°; PAN FINE=0.008
TILT=0.98°; TILT FINE=0.0004°
Automatic repositioning of PAN and TILT after accidental movement not controlled by control unit
ELECTRONICS
Long life self-charging buffer battery
Pre-set macros
Function reset from the lighting desk
ON/OFF lamp control from the lighting desk
“AUTOTEST” function from menu
ETHERNET ready
Electronic monitoring with status error
Cooling system monitoring
DMX level monitoring on all channels
Internal data transmission diagnostics
Firmware upgrade with no power
Firmware upload from another fixture
SAFETY DEVICES
Bipolar circuit breaker with thermal protection
Automatic break in power supply in case of overheating
Forced ventilation with axial fans
WORKING POSITION
Any working position
Hanging system: with fast-lock omega clamps (1/4 turn) on the base
CE MARKING
In conformity with the European Union Low Voltage Directive 2006/95/CE and Electromagnetic compatibility Directive 2004/108/ CE
ETL
This product will be available with cETLus Listed Mark, that complies with the UL 1573 and CSA C22.2 No. 166 standards
WEIGHT
19 kg (42 lbs)
자료제공 및 제품문의: 동서테크놀러지 http://www.tongsuhtech.com/index.html
sharpy wash330 많은 관심 부탁드립니다.